IBM TS3100 Setup, Operator, And Service Manual page 157

Figure 5-39. Path Failover license verification page
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Configure Library: Encryption
Note: Application Managed Encryption (AME) does not require a license key.
Library Managed Encryption (LME) and System Managed Encryption (SME)
require a license key which is available by purchasing Feature Code 5900.In
addition to the feature license key, SME and LME require the
implementation of an external Encryption Key Manager (EKM), to provide
and manage encryption keys. With AME, encryption key management is
handled by the application.
Important: The Advanced Encryption Settings are for Engineering Support use
only. These fields should always be set to "No Advanced Setting".
Minimum Prerequisites for Application Managed Encryption (AME) - LTO 6:
v SAS and Fibre Channel LTO Ultrium 6 Tape Drive (Full High or Half High)
v Ultrium 6 Tape Cartridge
v Library firmware level B.50 or higher
v Drive firmware level C800 or higher, for reference go to http://www.ibm.com/
fixcentral.
v Encryption Key Manager application
Minimum Prerequisites for Application Managed Encryption (AME) -LTO 5:
v SAS and Fibre Channel LTO Ultrium 5 Tape Drive (Full High or Half High)
v Ultrium 5 Tape Cartridge
v Library firmware level 9.00 or higher
v Drive firmware level BBNE/BBNF or higher, for reference go to
http://www.ibm.com/fixcentral.
v Encryption Key Manager application
Minimum Prerequisites for Application Managed Encryption (AME) - LTO 4:
v SAS and Fibre Channel LTO Ultrium 4 Tape Drive (Full High or Half High)
v Ultrium 4 Tape Cartridge
v Library firmware level 4.0 or higher
v Drive firmware level 74H4 or higher
v Encryption Key Manager application
Minimum Prerequisites for Library Managed Encryption (LME) and System
Managed Encryption (SME) - LTO 6:
5-47
Chapter 5. Operations