Appendix F. Snmp Status Mib Variables And Traps - IBM TS3100 Setup, Operator, And Service Manual

Ibm system storage tape library
Table of Contents

Advertisement

Appendix F. SNMP Status MIB Variables and Traps

Table F-1. SNMP Status Events
Event
| | |
Cold Start
Status Change
Door Open
Mail Slot Accessed
Fault Posted
Request Drive Clean
Drive Error
Loader Retries Excessive
Loader OK
Account Password Change
Note: Trap ID 9 requires library firmware level 8.0 or greater, and the latest SNMP MIB file.
Configuration Change
Library Login
Library Logout
Note: Trap IDs 10, 11, and 12 require library firmware level 9.00 or greater and the latest SNMP MIB file.
© Copyright IBM Corp. 2007, 2012
Note: For additional information, refer to "SNMP Messaging" on page 1-6.
Trap ID
0
1
2
3
4
5
6
7
8
9
10
11
12
Definition
Library has rebooted.
Library status has changed.
Library door has been opened.
Library I/O Station has been
accessed.
Library has posted a hard fault/error.
Drive has requested a clean.
Drive has reported an error.
Library has reported excessive load
retries.
Library has resumed normal
operations.
Account password in the library has
changed.
Library or drive configuration has
changed.
Someone has logged into the library
via the Web User Interface.
Someone has logged out of the
library via the Web User Interface.
F-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts3200

Table of Contents