IBM TS3100 Setup, Operator, And Service Manual page 23

CAUTION:
v Do not install a unit in a rack where the internal rack
ambient temperatures WILL exceed the manufacturer's
recommended ambient temperature for all your rack
mounted devices.
v Do not install a unit in a rack where the air flow is
compromised. Ensure that air flow is not blocked or
reduced on any side of the unit.
v Connect the equipment to the supply circuit such that
overloading of the circuits does not compromise the
supply wiring or overcurrent protection. To provide the
correct power connection to a rack, refer to the rating
labels located on the equipment in the rack to determine
the total power requirement of the supply circuit.
v (For sliding drawers) Do not pull out or install any drawer
or feature if the rack stabilizer brackets are not attached
to the rack. Do not pull out more than one drawer at a
time. The rack may become unstable if you pull out
more than one drawer at a time.
v (For fixed drawers) Do not move a fixed drawer.
Attempting to move the drawer partially or completely
out of the rack may cause the rack to become unstable
or cause the drawer to fall out of the rack.
(R001)
Safety and Environmental Notices
xxi