Configure: Logical Libraries Menu - IBM TS3100 Setup, Operator, And Service Manual

v Set Access PIN
v Save/Restore
v Set Date and Time
Configure: Logical Libraries
Use this menu item to select the number of logical libraries. The Currently
Configured - x section shows the number of logical libraries currently configured.
Figure 5-13. Configure: Logical Libraries menu
Note: The maximum number of Logical Libraries in a 2U is two.
Note: This menu is only available on libraries with multiple drives.
Note: Whenever there is a hardware configuration change such as drives being
swapped with different form factors (i.e. HH to FH or FH to HH), a library
configuration change is needed. Reconfiguring the library by reassigning the
amount of logical libraries will clear this issue.
5-19
Chapter 5. Operations