Installing Your Drive(S) In The Replacement Library Enclosure; Removing The Shipping Label And Lock From The Top Of The Library And Storing On The Rear Panel; Library Shipping Lock And Label Storage Location On The Real Panel Of The Library - IBM TS3100 Setup, Operator, And Service Manual

Figure 10-17. Removing the shipping label and lock from the top of the library and storing on the rear panel
5. Store the lock and label on the back panel of the replacement library enclosure
Figure 10-18. Library shipping lock and label storage location on the real panel of the library
6. Proceed to "Installing Your Drive(s) in the Replacement Library Enclosure."

Installing Your Drive(s) in the Replacement Library Enclosure

Note: It is important to install the drives from the defective library into the
10-18
TS3100 Tape Library and TS3200 Tape Library Setup, Operator, and Service Guide
(see Figure 10-18).
same positions in the replacement library enclosure in order to maintain
your current library configuration.
1
2