Configure: Drive Menu - IBM TS3100 Setup, Operator, And Service Manual

Configure: Drive
SAS drives
do not
require user
configuration
Figure 5-15. Configure: Drive menu
The following items are in this menu:
v Drive Interface - use this to assign a SCSI ID to a SCSI drive or to assign a Port
v Control Paths - use this to enable the drive as a control path drive. Each logical
Drive Interface
SCSI ID
Speed, Port Type, and Loop ID to a Fibre Channel drive. SAS drives do not
require user configuration. For more information on drive interfaces, refer to
"Host Interfaces" on page 3-7.
library must have a control path drive; however, all drives in a logical library
can be designated as control path drives.
Configure
Drive
Control Path
A Speed
A Type
A Loop ID
Fibre Channel Drive
5-23
Chapter 5. Operations