Paper Recommendations; Paper Storage; Envelopes Recommendations; Labels Recommendations - Oki B412dn User Manual

Monarch
Nagagata 3
Nagagata 4
Yougata 4
Custom
Label A4
Letter
Partly-printing -
paper

Paper Recommendations

Paper storage

Paper Recommendations
Your printer will handle a variety of print media, including a range of paper weights and sizes.
This section provides general advice on choice of media, and explains how to use each type.
The best performance will be obtained when using standard 75-90g/m
Use of heavily embossed or very rough textured paper is not recommended.
Pre-printed stationery can be used, but the ink must not offset when exposed to the high fuser temperatures used in the printing
process.
Envelopes
Envelopes should be free from twists, curls or other deformations.
They should also be of the rectangular flap type, with glue that remains intact when subjected to hot roll pressure fusing used in this
type of printer. Window envelopes are not suitable.
Labels
Labels should also be of the type recommended for use in copiers and laser printers, in which the base carrier page is entirely covered
by labels.
Other types of label stock may damage the printer due to the labels peeling off during the printing process.
Paper storage
If paper is not properly stored, it may absorb moisture, or develop discoloration or warping. Printing on such paper can adversely affect
print quality and/or paper feeding. Do not open the package until the paper is needed for actual use.
Store paper in places as shown below:
Inside a cabinet or other dry and dark place
On a flat surface
Temperature: 20℃, Humidity: 50% RH (relative humidity)
Do not store paper in the places as shown below:
Placing directly on the floor
Where paper is exposed to direct sunlight
Near the inside of an exterior wall
On an uneven surface
Where static electricity may be generated
Where temperature excessively rises high and temperature rapidly changes
Near a printer, air conditioner, heater, or duct
Note
Do not leave paper unwrapped for a long period. Doing so may result in printing problems.
98.4 x 190.5
(3.875 x 7.5)
120 x 235 mm
90 x 205 mm
105 x 235 mm
Width: 86 to 216
Length: 140 to 356
210 x 297 0.1 to 0.15 mm
(8.5 x 11)
- Paper weight 60 to 163 g/m
175
2
2
paper designed for use in copiers and laser printers.