Setting Google Cloud Print - Oki B412dn User Manual

Setting Google Cloud Print

To use Google Cloud Print, a Google account is required. This section describes how to register the printer in Google Cloud Print by using
a Google account.
If you already have an account, there is no need to create a new account. Proceed to step 3.
Memo
To enter the [Google Cloud Print] menu, the administrator password is required.
Although this manual describes the procedure for setting the server from the operator panel, it is recommended to set the server
from the Web page of the printer if you can operate from a computer.
To check from the Web page, select [Admin Setup] > [General Network Settings] > [TCP/IP] in
Printer".
1.
Access the Google Web site from a computer, smartphone, or other mobile device.
Google Web site (https://accounts.google.com/signup)
2.
Create a Google account by following the on-screen instructions.
3.
Check that the printer's IP address, subnet mask, and gateway address are set correctly.
4.
Press or
5.
Press or
6.
Press or
7.
Check the [DNS PRIMARY] setting value.
Since [0.0.0.0] indicates that the value is not set correctly, set the IP address that suits your environment.
If the secondary DNS server is also used, display [DNS SECONDARY] in step 7, and then set the IP address.
If the proxy server is used, display [PROXY] in step 7, and then proceed to step 9.
If the proxy server is not used, proceed to step 17.
8.
Press or
9.
Press or
10.
Enter a server name.
11.
Press or
12.
Enter the proxy server port number.
13.
Press or
14.
Enter the proxy user ID.
15.
Press or
16.
Enter the proxy password.
Memo
For the setting values, contact your network administrator.
17.
Press (BACK) to return to the [Google Cloud Print] menu.
18.
Select the printer to register in Cloud from the printers that are listed on the screen of the computer,
and then click [Register to Google Cloud Print].
19.
When a message is displayed to prompt you to check the registration on the operator panel, select
[OK].
on the operator panel to display [Google Cloud Print], and then press
to display [SETTINGS OF Google Cloud Print], and then press
to display [DNS PRIMARY], and then press
to display [ENABLE], and then press
to display [PROXY SERVER], and then press
to display [PROXY PORT NO.], and then press
to display [PROXY USER ID], and then press
to display [PROXY PASSWORD], and then press
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
138
"Using the Web page of the
(OK).
(OK).