For The Usb - Installing Software You Want To Use With Custom Install - Oki B412dn User Manual

10.
When a prompt is displayed to connect the printer to the computer and turn the printer on, connect
the printer to the computer with the USB cable, and then turn the printer on.
Follow the on-screen instructions to complete the installation.
11.
When the installation process is complete, click [Exit].
The installation is complete.
12.
Click [x] in the upper right of the [Setup] window to close it.
13.
Click [Start] from the Windows menu, and then select [Devices and Printers].
14.
Check that the [OKI B432] icon is displayed.
Right-click the [OKI B432] icon, select printer properties, and then check that all printer drivers are displayed in the sub menu.
15.
Remove the "Software DVD-ROM" from the computer.
16.
Perform a test print from the computer.
Memo
To perform a test print, click [Start] from the Windows menu, right-click the [OKI B432] icon in the [Devices and Printers]
window, select [Devices and Printers] > [OKI B432 (*)] > [General] tab, and click [Print Test Page].
* Select a printer driver type by which you want to perform a test print.
Installing Software You Want to Use with Custom Install
1.
Check that the printer is turned off and the USB cable is unplugged from the computer.
2.
Turn the computer on.
Insert the "Software DVD-ROM" into a computer.
3.
When [AutoPlay] is displayed, click [Run Setup.exe].
487