Changing the Operation Mode of the Printer (Emulation)
You can select the emulation mode.
1.
Press
or
2.
Enter the administrator password.
The factory default password is "aaaaaa".
3.
Press
(OK).
4.
Press
or
5.
Press
or
The currently set mode flashes.
6.
Press
or
[*] is added to the right side of the set item.
7.
Press
(ONLINE) to select [READY TO PRINT].
on the operator panel to display [ADMIN SETUP], and then press
to select [PRINT SETUP], and then press
to select [PERSONALITY], and then press
to select the emulation mode, and then press
(OK).
(OK).
(OK).
554
(OK).