Setting Sleep Mode; Setting The Length Of Idle Time Before Entering Sleep Mode; Exiting Sleep Mode Or Deep Sleep Mode To Standby Status - Oki B412dn User Manual

Setting Sleep Mode

When a set period of time elapses, the printer enters Sleep mode from Power Save mode. In Sleep mode, the status of the printer is
almost the same as when the printer is turned off.
Note
If an error has occurred, the printer does not enter Sleep mode.
If the wired network connection is switched to the wireless network connection, the machine does not enter Deep Sleep mode but
enters Sleep mode.
If the wireless network connection is switched to the wired network connection, the machine enters Deep Sleep mode.

Setting the Length of Idle Time before Entering Sleep Mode

Exiting Sleep Mode or Deep Sleep Mode to Standby Status

Setting the Length of Idle Time before Entering Sleep Mode
1.
Press or
2.
Press or
3.
Press or
4.
Press or
[*] is added to the right end of the set value.
Available transition time settings
1 minute*, 2 minutes,
* indicates the factory default setting.
5.
Press (ONLINE) to switch to [READY TO PRINT].
Topics
Sleep mode
About Restrictions in Sleep Mode and Deep Sleep Mode
Exiting Sleep Mode or Deep Sleep Mode to Standby Status
1.
Press (POWER SAVE) on the operator panel.
Memo
When the printer receives data from a computer or other devices, the printer returns to standby status.
on the operator panel several times until [MENUS] is displayed, and then press
several times until [SYSTEM ADJUST] is displayed, and then press
several times until [SLEEP TIME] is displayed, and then press
to select the transition time, and then press
3 minutes, 4 minutes,
(OK).
5 minutes, 10 minutes,
195
(OK).
(OK).
15 minutes, 30 minutes,
(OK).
60 minutes