Paper Recommendations; Cassette Tray - Oki C3000 Series Manual

P
APER RECOMMENDATIONS
Your printer will handle a variety of print media, including a range of paper weights and
sizes and envelopes. This section provides general advice on choice of media, and explains
how to use each type.
The best performance will be obtained when using standard 75~90g/m² paper designed
for use in copiers and laser printers. Suitable types are:
> Arjo Wiggins Conqueror Colour Solutions 90g/m²;
> Colour Copy by Neusiedler.
Use of heavily embossed or very rough textured paper is not recommended.
Pre-printed stationery can be used, but the ink must not offset when exposed to the high
fuser temperatures used in the printing process.
Envelopes should be free from twist, curl or other deformations. They should also be of
the rectangular flap type, with glue that remains intact when subjected to hot roll pressure
fusing used in this type of printer. Window envelopes are not suitable.
Labels should also be of the type recommended for use in copiers and laser printers, in
which the base carrier page is entirely covered by labels. Other types of label stock may
damage the printer due to the labels peeling off during the printing process.
C
ASSETTE TRAY
SIZE
A6
A5
B5
Executive
A4
Letter
Legal 13in.
Legal 13.5in.
Legal 14in.
DIMENSIONS
105 x 148mm
148 x 210mm
182 x 257mm
184.2 x 266.7mm
210 x 297mm
215.9 x 279.4mm
216 x 330mm
216 x 343mm
216 x 356mm
Paper recommendations > 12
WEIGHT
Light 64-74g/m²
Medium 75-104g/m²
Heavy 105-120g/m²