Oki B412dn User Manual page 279

The printer may be cleaning the image
drum.
The printer is adjusting the temperature
of the fuser unit.
The printer is processing data from
another interface.
Printing stops The temperature inside the printer rises
halfway. due to continuous printing for a long
time, resulting in the temperature being
adjusted.
Free space in The print data is complicated.
memory is
insufficient.
All pages are not The WSD port is used.
printed.
Printing is slow. Printing process is also processed in the
computer.
The print data is complicated.
The printer driver is The printer driver may not be operating
not correctly correctly.
displayed.
The printer turns off If the printer is not used for a certain
automatically. period of time (the factory default is
4 hours), the printer turns off
automatically. This function is called
Auto Power Off.
entering Power Save, Sleep or Deep Sleep mode.
Wait for a while.
Wait for a while.
Wait until printing is completed.
Wait for a while.
When the printer reaches the suitable temperature,
printing restarts automatically.
Simplify the print data.
Change the print port to Standard TCP/IP Port.
Use a computer with faster processing speed.
Simplify the print data.
Uninstall the printer driver, and then install it
again.
Press or on the operator panel to select
[ADMIN SETUP] > [POWER SETUP] > [AUTO PW
OFF], and then set Auto Power Off to [DISABLE].
278
Save Function
-
-
-
-
-
-
-
-
Removing the
Installed Printer
Driver
Installing
Printer Drivers
in a Computer
Reducing Power
Consumption
by
Automatically
Turning the
Machine Off