Table of Contents
Advertisement
PAPER RECOMMENDATIONS
Your printer will handle a variety of print media, including a range of
paper weights and sizes, transparencies and envelopes. This section
provides general advice on choice of media, and explains how to use
each type.
The best performance will be obtained when using standard 75~90g/m²
paper designed for use in copiers and laser printers. Suitable types are:
>
>
Use of heavily embossed or very rough textured paper is not
recommended.
Pre-printed stationery can be used, but the ink must not offset when
exposed to the high fuser temperatures used in the printing process.
Envelopes should be free from twist, curl or other deformations. They
should also be of the rectangular flap type, with glue that remains
intact when subjected to hot roll pressure fusing used in this type of
printer. Window envelopes are not suitable.
Transparencies should be of the type designed for use in copiers and
laser printers. We strongly recommend Oki transparencies (Order
No. 01074101). In particular, avoid office transparencies designed
for use by hand with marker pens. These will melt in the fuser and
cause damage.
Labels should also be of the type recommended for use in copiers and
laser printers, in which the base carrier page is entirely covered by
labels. Other types of label stock may damage the printer due to the
labels peeling off during the printing process. Suitable types are:
>
>
Arjo Wiggins Conqueror Colour Solutions 90g/m²;
Colour Copy by Neusiedler.
Avery White Laser Label types 7162, 7664, 7666 (A4),
or 5161 (Letter);
Kokuyo A693X series (A4) or A650 (B5).
PAPER RECOMMENDATIONS > 13
Advertisement
Table of Contents
