Oki B412dn User Manual page 526

9.
Set the delay time from when a failure occurs to when an E-mail is sent.
Memo
If you set the delay time, the printer notifies you of failures that keep occurring for a long time only.
If you set the delay time to [0 Hours 0 Minutes], an E-mail is sent immediately after a failure occurs.
10.
Click [OK].
11.
Check the failure notification settings.
To display a list
Click [View a Summary of Current Configuration].
Check the settings, and then close the window.
To compare the settings conditions of two destinations
Select an address to compare from a list box.
Check the displayed settings.
Memo
You can change a notification condition setting by clicking it in the condition setting table.
525