Oki B412dn User Manual page 520

Note
If you specify a domain name in [SMTP Server], you must set the DNS server for the [TCP/IP] setting.
You must set the mail server to allow the printer to send an E-mail. For details on the mail server setting, check with your
network administrator.
8.
Click [Set detail of the SMTP Protocol.] in [STEP3. More detail settings].
If you do not need to set [Security Settings] and [Configure attached information], proceed to step 15.
9.
Click [Security settings].
10.
Select [Authentication Method].
If you set [Authentication Method] to [SMTP], set [SMTP Server UserID], [SMTP Server Password], [SMTP Encryption], and [SMTP
Port Number].
If you set [Authentication Method] to [POP], set [POP3 Server], [POP3 UserID], [POP3 Password], [POP3 Encryption], [POP3 Port
Number], and [APOP Support].
Note
Incorrect settings result in the E-mail transmission function not working properly. Use care.
11.
Click [OK].
12.
Click [Configure attached information].
13.
Select or enter information you want to add to the end of an E-mail transmission massage.
14.
Click [OK].
519