Paper Recommendations - Oki C822n User Manual

Supported Paper
Paper Type
Envelope
2
Index card
Label
Partly-printing paper
Color paper
Use paper that meets the following conditions*
● Paper that meets the conditions for plain paper.
● An ink used for a part printing is heat resistant (230°C).
Note
● When specifying a printing area, please take into account the differences of printing position as followings:
Print start position: ±2 mm, Paper skew: ±1 mm/100 mm, Image stretch: ±1 mm/100 mm
(when paper ream weight is 80 g/m
● This printer cannot print on an ink.
Use paper that meets the following conditions*
● A pigment or an ink used to color paper is heat resistant (230°C).
● Paper that has same characteristics with light paper and used for an electronic photo printer.

Paper Recommendations

Your printer will handle a variety of print media,
including a range of paper weights and sizes.
This section provides general advice on choice of
media, and explains how to use each type.
The best performance will be obtained when
using standard 75 - 90 g/m
use in copiers and laser printers.
Use of heavily embossed or very rough textured
paper is not recommended.
Pre-printed stationery can be used, but the ink
must not offset when exposed to the high fuser
temperatures used in the printing process.
Paper Size mm (inch)
Com-10
DL
C5
C4
Index card
A4
Letter
Subject to the plain paper*
Subject to the plain paper*
)
2
2
paper designed for
104.8 x 241.3
(4.125 x 9.5)
110 x 220
(4.33 x 8.66)
162 x 229
(6.4 x 9)
229 x 324
(9 x 12.76)
76.2 x 127
(3 x 5)
210 x 297
215.9 x 279.4
(8.5 x 11)
1
2
1
:
2
:
● Envelopes should be free from twist, curl or
other deformations. They should also be of the
rectangular flap type, with glue that remains
intact when subjected to hot roll pressure fusing
used in this type of printer. Window envelopes are
not suitable.
● Labels should also be of the type recommended
for use in copiers and laser printers, in which the
base carrier page is entirely covered by labels.
Other types of label stock may damage the printer
due to the labels peeling off during the printing
process.
- 54 -
Paper Weight
Envelopes should be 85 g/m
flap parts of envelopes should be folded
0.1 - 0.2 mm
2
64 to 256 g/m
2
64 to 256 g/m
CAUTION
2
paper, and