Cloning The User Setting - Oki B412dn User Manual

Cloning the User Setting

You can copy the user setting to another printer.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the source device to be cloned from [Registerd Device Table].
3.
Select the [User Setting] tab.
4.
Click [Cloning].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Select a cloning destination and the setting to be cloned.
7.
Click [Execute].
8.
Enter the password for the cloning destination, and then click [OK].
The result is displayed.
331