Loading In Tray 1 Or Tray 2 - Oki B412dn User Manual

Loading in Tray 1 or Tray 2

The following procedure describes how to load paper in Tray 1 or Tray 2.
Note
The following procedure uses Tray 1 as an example, and the same procedure applies to Tray 2.
1.
Pull the paper cassette out.
2.
Adjust the paper guide and paper stopper to the paper size and secure them.
Note
Do not remove the cork attached to the metal plate.
3.
Fan a stack of paper well, and then align the edges of the paper.
4.
Load paper with the print side face down.
Note
Place the paper against the front side of the paper cassette.
Do not press the paper against the paper stopper (rear) so hard that the paper bends.
Do not load paper over the "
B412, B432, ES4132 (less than about 25 mm total thickness with 250 sheets of paper with a paper weight of 80 g/m
B512, ES5112 (less than about 25 mm total thickness with 530 sheets of paper with a paper weight of 80 g/m
" mark of the paper guide.
180
2
).
2
).