Open Memory Bank Channels; Canceling A Memory Channel Registered; In Memory A Bank; Assigning A Name To A Memory Bank - Yaesu FT-70DR Advance Manual

Open Memory Bank Channels

1. After pressing the [ F ] key, press the [ BAND ]
key.
2. Rotate the DIAL knob to select the memory
bank (b1 to b24) to be recalled.
If no memory channel is registered, the memory
bank may not be selected.
3. Press the [ BAND ] key.
The selected memory bank is activated.
Canceling a Memory Channel Registered in Memory a Bank
1. Recall the memory bank to cancel registering.
2. Rotate the DIAL knob to select the memory channel to cancel registering to the
memory channel.
3. Press and hold the [ V/M ] key.
4. Press the [ AMS ] key.

Assigning a Name to a Memory Bank

1. Press and hold the [ F ] key to enter the Set Mode.
2. Rotate the DIAL knob to select the Set Mode [ 9 BNK.NAM ] .
3. Press the [ F ] key.
4. Rotate the DIAL knob to select the memory bank to assign the name.
5. Press the [ V/M ] key.
The character input screen is displayed.
The default memory bank names are set from "BANK 1" to "BANK 24. Each name may be
changed.
6. Use the numeric keys or DIAL knob, to input the name characters.
• Inputting characters:
Example, quickly pressing the [ 2 ] key each time switches the following characters.
A → B → C → 2 → A → –––
Example, Rotating the DIAL switches the following characters.
–––  A-Z  (symbol)  0-9  (symbol) A-Z  –––
• Moving the cursor & deleting input characters:
[ BAND ] key:
[ MODE ] key:
Pressing and holding the [ GM ] key:
7. Press the PTT switch to save the setting and return to normal operation.
The memory bank name is set and the transceiver exits from Set mode.
Moves the cursor to the right
Moves the cursor to the left
16
Memory Bank Number
Erases all characters after the cursor
FT-70DR/DE Advance Manual