Upper Inner Trim - Subaru LEGACY 2004 Service Manual

EXTERIOR/INTERIOR TRIM

25.Upper Inner Trim

A: REMOVAL
1) From the top side of trim, remove the metal clip
using flat tip driver.
CAUTION:
When metal clip is removed from upper inner
trim, replace the both of upper inner trim and
metal clip with new ones.
2) Remove the front pillar upper trim.
3) Remove the front inside scuff plate, rear inside
scuff plate and center pillar lower trim. <Ref. to EI-
60, REMOVAL, Lower Inner Trim.>
4) Remove the cap on the upper side of pillar trim,
and remove the bolt inside. (Model with curtain air-
bag)
Upper Inner Trim
5) Remove the center pillar upper trim.
6) Remove the seat belt lower anchor bolt cover.
EI-00785
7) Remove the seat belt lower anchor bolt, and pull
out the seat belt from center pillar upper trim.
EI-00786
B: INSTALLATION
Install in the reverse order of removal.
EI-00562
EI-62
: (A)
(A) Clip
EI-00787
EI-00788
SB-00145