EXTERIOR/INTERIOR TRIM
11.Roof Spoiler
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-69, RE-
MOVAL, Rear Gate Trim.>
3) Disconnect the connector of the high mounted
stop light and the washer hose of rear washer.
4) Remove the cap nut and plastic caps.
5) Remove the clips, and remove the roof spoiler.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
!
4.5 N
m (0.46 kgf-m, 3.32 ft-lb)
Roof Spoiler
EI-00828
EI-00646
EI-40