Sedan Model - Subaru LEGACY 2004 Service Manual

1. SEDAN MODEL

1) Align the coulisse assembly and link assembly in the same position.
(1)
(2)
(3)
(1) Front
(2) Coulisse ASSY
(3) Link ASSY
(4) 4.7 mm (0.185 in)
2) Install the motor assembly.
3) Connect the harness connector of motor assembly, and then connect the battery ground cable to battery.
4) Perform the initialize operation of motor.
(1) Tilt up the glass lid.
(2) Release the switch once, and press the tilt up switch again for 15 seconds.
(3) When the glass lid is raised a little and on tilt up position, release the switch for the moment.
(4) Keep pressing the tilt up switch within 5 seconds from releasing the switch, glass lid tilts down "
slides open " slides close operation automatically, and then initialize operation is completed.
5) Check the operation of sunroof with following table.
(1) Glass lid closes completely.
(2) Glass lid tilt up to the top position.
(3) Glass lid lowers completely.
(4) Glass lid opens completely.
(5) Glass lid closes 150 mm (5.91 in) away from completely closed position.
(6) Glass lid closes completely.
6) Install the trim in the reverse order of removal.
Sunroof Motor
(4)
SR-00094
Operation
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
SR-13
Switch position
Close
Tilt up
Tilt down
Open
Close
Close