Subaru LEGACY 2004 Service Manual page 668

Hide thumbs Also See for LEGACY 2004:
Table of Contents

Advertisement

CRUISE CONTROL SYSTEM (DIAGNOSTICS)
DTC
Item
33
WAIT is prohibited after
operating accelerator
pedal.
34
Prohibited when accelera-
tor pedal position large is
continued.
35
Prohibited when vehicle
speed feedback unavail-
able.
41
VDC/TCS operation
42
High speed CAN commu-
nication malfunction
43
ABS/VDC malfunction
44
Body integrated module
malfunction
45
Meter malfunction
List of Diagnostic Trouble Code (DTC)
Controlled vehicle speed increased above the limit dur-
ing cruising.
The vehicle has been driven at higher speed than set
vehicle speed for an abnormal period of time (about 10
minutes) during cruise driving.
Set vehicle speed cannot keep because of some rea-
sons (steep uphill, parking brake, abnormal decrease of
engine output, etc.) during cruise driving.
Vehicle dynamics control (VDC) or TCS is operated dur-
ing cruise driving or cruise setting.
High speed CAN communication malfunction is detected
during cruise driving or cruise setting.
ABS or vehicle dynamics control (VDC) system malfunc-
tion is detected during cruise driving or cruise setting.
Body integrated module system malfunction is detected
during cruise driving or cruise setting.
Combination meter malfunction is detected during cruise
driving or cruise setting.
CC(diag)-14
Contents of diagnosis
Reference
This DTC is displayed
when driving at higher
speed than appropriate
cruise control speed. In
this case, lower the vehi-
cle speed to the speed
available for cruise set,
and perform cruise set
operation again.
This DTC is displayed
when driving for a long
period of time at higher
speed than appropriate
cruise set vehicle speed
by operating accelerator
pedal. In this case,
release the cruise set.
This DTC is displayed
when driving condition is
not suitable for cruise con-
trol. Perform cruise set
operation again after elim-
inating the estimated
cause.
This DTC is displayed
when driving condition is
not suitable for cruise con-
trol. Perform cruise set
operation again after elim-
inating the estimated
cause.
<Ref. to LAN(diag)-2,
Basic Diagnostic Proce-
dure.>
<Ref. to ABS(diag)-2,
Basic Diagnostic Proce-
dure.> or <Ref. to
VDC(diag)-2, Basic Diag-
nostic Procedure.>
<Ref. to LAN(diag)-2,
Basic Diagnostic Proce-
dure.>
<Ref. to LAN(diag)-2,
Basic Diagnostic Proce-
dure.>

Advertisement

Table of Contents
loading

Table of Contents