Rear Seat Belt - Subaru LEGACY 2004 Service Manual

SEAT BELT SYSTEM

6. Rear Seat Belt

A: REMOVAL
1. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (SEDAN MODEL)
1) Remove the rear seat. <Ref. to SE-14, REMOV-
AL, Rear Seat.>
2) Remove the seat belt lower anchor bolt.
3) Remove the rear quarter trim. <Ref. to EI-63,
SEDAN MODEL (MODEL WITH CURTAIN AIR-
BAG), REMOVAL, Rear Quarter Trim.>
4) Remove the bolt to remove outer seat belt as-
sembly.
2. SHOULDER SEAT BELT CTR ASSEM-
BLY (SEDAN MODEL)
1) Remove the rear cushion seat. <Ref. to SE-14,
REMOVAL, Rear Seat.>
2) Remove the seat belt lower anchor bolt.
NOTE:
For the model with rear seat belt warning light, dis-
connect the connector of seat belt warning light.
Rear Seat Belt
3) Remove the rear quarter trim. <Ref. to EI-63,
REMOVAL, Rear Quarter Trim.>
4) Remove the rear shelf trim. <Ref. to EI-70, RE-
MOVAL, Rear Shelf Trim.>
5) Remove the bolt to remove shoulder seat belt
assembly.
3. CENTER SEAT BELT LH ASSEMBLY
(SEDAN MODEL)
SB-00084
1) Remove the rear seat cushion. <Ref. to SE-14,
REMOVAL, Rear Seat.>
2) Remove the bolt to remove center seat belt LH
assembly.
SB-00089
NOTE:
For the model with rear seat belt warning light, dis-
connect the connector of seat belt warning light.
SB-00149
SB-14
SB-00089
SB-00150