GLASS/WINDOWS/MIRRORS
12.Rear Regulator and Motor As-
sembly
A: REMOVAL
1) Remove the rear door glass. <Ref. to GW-22,
REMOVAL, Rear Door Glass.>
2) Remove the nut (A) to remove front sash.
(A)
3) Disconnect the motor connector.
4) Remove the four bolts and two nuts to remove
regulator assembly.
5) Remove the screws to remove motor assembly.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the rear door glass. <Ref. to GW-23, AD-
JUSTMENT, Rear Door Glass.>
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to GW-5, REAR DOOR GLASS,
COMPONENT, General Description.>
Rear Regulator and Motor Assembly
GW-00289
GW-00290
GW-00291
GW-24
C: INSPECTION
1) Make sure that the power window motor rotates
properly when the battery voltage is applied to the
terminals of motor connector.
2) Change polarity of battery connection to termi-
nals to ensure that the motor rotates in reverse di-
rection.