Upper Link - Subaru LEGACY 2006 Manual

asieps_tobira.book 13 ページ ２００９年１０月２６日 月曜日 午前９時１６分

5. Upper Link

A: REMOVAL
1) Lift up the vehicle, and then remove the rear
wheels.
2) Support the rear arm horizontally using a trans-
mission jack.
(1)
(1) Rear arm
(2) Transmission jack
3) Remove the bolt which secures the upper link to
sub frame.
4) Remove the bolts which secure the upper link to
the rear arm, and then remove the upper link.
Upper Link
(2)
RS-00052
RS-00058
RS-00059
RS-13
B: INSTALLATION
1) Support the rear arm horizontally using a trans-
mission jack.
2) Using new self-locking nuts, install the upper
link.
(1)
(2)
(1) Rear arm
(2) Transmission jack
NOTE:
Inspect the wheel alignment and adjust it if neces-
sary.
Tightening torque:
Upper link-to-Sub frame
120 N·m (12.2 kgf-m, 89 ft-lb)
Upper link-to-Rear arm
120 N·m (12.2 kgf-m, 89 ft-lb)
C: DISASSEMBLY
Using the ST, press the bushing out.
ST 20099AE010 INSTALLER & REMOVER
ST
REAR SUSPENSION
RS-00052
RS-00061