EXTERIOR/INTERIOR TRIM
18.Door Trim
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the cover (A) at inner remote area.
3) Pull the hand grip cover toward you, and remove
it.
4) Loosen the screws.
5) Remove the clips, and disconnect each connec-
tor and wire to remove door trim.
• Front door trim
Door Trim
(A)
EI-00649
EI-00650
EI-00651
EI-00652
EI-48
• Rear door trim
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Be careful not to install the hand grip cover and
plate clip of hand grip in the wrong direction.
• Hand grip cover (front and rear door)
Convex upward
• Bottom clip of the front door faces the opposite
direction
EI-00656
EI-00653
EI-00654