Front Hood Grille - Subaru LEGACY 2004 Service Manual

3. Front Hood Grille

A: REMOVAL
1) Open the front hood.
2) Remove the front hood insulator. <Ref. to EB-
13, FRONT HOOD INSULATOR, REMOVAL,
Front Hood.>
3) Remove the screws (A) and clip (B), and remove
the front hood duct.
(A)
4) Loosen the nuts (A), remove the clip (B), and
then remove the front hood grille.
(A)
B: INSTALLATION
1) Fit the clip (B) of front hood grille, and install the
front hood grille using nuts (A).
(A)
Tightening torque:
!
4.5 N m (0.46 kgf-m, 3.32 ft-lb)
Front Hood Grille
(B)
(A)
EI-00632
(B) (A)
EI-00633
(B) (A)
EI-00633
2) Insert the hooks (B) of the front hood duct into
holes (A) of the front hood.
3) Install the front hood duct with the screws (A)
and clip (B).
(A)
EI-25
EXTERIOR/INTERIOR TRIM
(A)
(B)
EI-00634
(B)
(A)
EI-00632