Subaru LEGACY 2004 Service Manual page 429

Combination Meter Assembly
INSTRUMENTATION/DRIVER INFO
C: DISASSEMBLY
CAUTION:
• Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
• Be careful not to apply excessive force to the trip knob.
• Be sure not to touch the meter indicator needle.
Remove the pawl (A), and then detach the meter glass assembly (B) and meter panel assembly (C) from
meter case assembly (D).
(A)
(B)
(C)
(D)
IDI00102
1. BULB REPLACEMENT
LEDs are used for all of warning lights and indicator lights of combination meters, replace the meter case as-
sembly if faulty.
D: ASSEMBLY
Assemble in the reverse order of disassembly.
IDI-17