12.Front Door Trim
A: REMOVAL
CAUTION:
Do not apply excessive force to the clip. Other-
wise the clip may be broken.
1) Disconnect the ground cable from battery.
2) Pull the inner remote cover toward you to re-
move upper hook. Pull down it to remove the lower
hook. Remove the inner remote cover.
3) Remove the screw.
4) Remove the power window switch assembly and
disconnect the harness connector. (for models with
power window)
Remove the pull handle and panel. (for models
without power window)
5) Remove the screw.
6) Remove the clips (A) of trim panel using clip re-
mover to remove the trim panel.
: (A)
Front Door Trim
B: INSTALLATION
Install in the reverse order of removal.
EI-00455
EI-00457
EI-00459
EI-37
EXTERIOR/INTERIOR TRIM