Rear Seat Belt - Subaru FORESTER 2004 Service Manual

SEAT BELT SYSTEM

5. Rear Seat Belt

A: REMOVAL
1. OUTER BELT SIDE
1) Remove the luggage floor mat. <Ref. to EI-50, RE-
MOVAL, Luggage Floor Mat.>
2) Remove the rear seat. <Ref. to SE-13, REMOV-
AL, Rear Seat.>
3) Remove the rear quarter trim. <Ref. to EI-45, RE-
MOVAL, Rear Quarter Trim.>
4) Remove the seat belt lower anchor bolt.
5) Remove the anchor cover. Remove the bolt and
shoulder anchor from pillar.
6) Remove the rear quarter trim. <Ref. to EI-45, RE-
MOVAL, Rear Quarter Trim.>
7) Remove the bolts, and then detach the outer belt
side.
Rear Seat Belt
8) Remove the two bolts and adjustable anchor as-
sembly.
2. OUTER BELT CENTER
1) Remove the anchor cover. Remove the bolt and
then detach the shoulder anchor from pillar.
SB-00008
2) Remove the strut cap. <Ref. to EI-45, REMOV-
AL, Rear Quarter Trim.>
3) Remove the rear rail trim. <Ref. to EI-45, RE-
MOVAL, Rear Quarter Trim.>
4) Remove the rear pillar upper trim. <Ref. to EI-45,
REMOVAL, Rear Quarter Trim.>
5) Remove the rear skirt trim. <Ref. to EI-45, RE-
MOVAL, Rear Quarter Trim.>
SB-00009
6) Remove the rear quarter lower trim. <Ref. to EI-
45, REMOVAL, Rear Quarter Trim.>
7) Remove the cover (B) while detaching snap lock
carefully. Put the outer belt center tongue (A) out to
the other side of the trim through the hole.
SB-00010
8) Remove the clips and hang down rear end of
roof trim.
SB-12
SB-00011
SB-00009
SB-00012