Setting Up The System Using The Wizard; Testing The Setup - Fortinet fortivoice Administrator's Manual

10.Type admin and press Enter twice. (In its default state, there is no password for this
account.)
The CLI displays the following text:
Type ? for a list of commands.
You can now enter commands. For information about how to use the CLI, including how to
connect to the CLI using SSH or Telnet, see the

Setting up the system using the wizard

The FortiVoice unit's Configuration Wizard leads you through required configuration steps,
helping you to quickly set up your FortiVoice system. Once the setup is complete, you can make
phone calls through the FortiVoice unit.
While all settings configured by the Configuration Wizard can also be configured through the
web-based manager, the wizard presents each setting in the necessary order.
The wizard is a reusable tool and you can modify the configuration settings. Each time you click
the Next button, the configuration is saved.
To start the wizard, open the web-based manager in a browser and click Wizard in the
top-right button row.

Testing the setup

After a configuration through the Configuration Wizard, you can connect a SIP phone to your
VoIP network and make an internal, external, or office peer test call.
If the SIP phone and the FortiVoice unit (PBX) are on different subnets, proper routing should
be set to make them reachable
If you make a office peer test call, make sure that your FortiVoice unit and the peer office PBX
are mutually registered. For more information, see
Depending on the phone you use, the procedure to connect the phone may vary. Refer to the
phone user manuals for instructions.
Generally, you need to configure the following on the phone after powering it up and connecting
it to the network:
• Enter the IP address of the phone if it is not DHCP-enabled.
• Enter the SIP server IP address and port number (5060 by default) of the FortiVoice unit. You
can find the SIP serve IP by the Configuration Wizard and going to System Setting > Network
Setting.
• Enter the extension number and SIP password you have configured and make sure the
extension is enabled. You can find the information by opening the Configuration Wizard and
going to Extension > Import/Add/Edit and double-click an extension.
If you have not imported or added any extensions, do it first. For more information, see
"Configuring IP extensions" on page
your phone should match.
Fortinet Technologies Inc.
FortiVoice CLI Reference.
"Configuring office peers" on page
130. The extension number on the FortiVoice unit and
Page 18 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
182.