Installation
Connecting the phone
1. Connect the handset cord to the handset and the
2. Connect the WAN port to the network with the provided Ethernet cable.
3. Optionally connect your desktop PC to the PC port with an Ethernet cable (not supplied).
4. If the network supports PoE, a power adapter is not required. The phone requires 2.8 W to
function with PoE. If PoE is not supported on the network, connect the power adapter to the
DC 5V 1A power jack.
Setting up the phone
The phone supports plug and play installation and will automatically download its configuration
from the FortiVoice system. Once configured within the FortiVoice system, reboot the phone to
download its configuration and register to the system.
Installation
jack on the phone.
Page 3
FortiFone User Guide