Creating A Sip Trunk With Forticall Service - Fortinet fortivoice Administrator's Manual

Test Call
See also
•

Creating a SIP trunk with FortiCall service

Creating a SIP trunk with FortiCall service
You can create one trunk with FortiCall and use it free for 30 days or 300 minutes, whichever
comes first. Note that the trial account only allows outbound calling and no international calling
is available.
If you sign up for the service during a trial use, the trial is closed and billing will start.
To create a SIP trunk with FortiCall service
1. Go to Trunks > VoIP > SIP.
2. Click FortiCall.
The Create SIP Trunk dialog box displays.
Figure 58: Creating a SIP trunk with FortiCall service
3. Note down the MAC Address and System ID for use if you decide to sign up for the service
later. See
Fortinet Technologies Inc.
From number Enter the number from which you want to call the destination
number. The FortiVoice unit will connect this number with the
destination number for the test.
Test Click to start the dry run test and check the Test result.
Reset Click to remove the test result in order to start a new test.
Test the SIP trunk by making a real phone call.
Destination number Enter a destination number to call.
After call is Select the FortiVoice action once it calls the destination
established number:
• Play welcome message: The FortiVoice unit will play a
• Connect test call to number: In the Number field, enter the
Test Click to start the test and check the Test result.
Reset Click to remove the test result in order to start a new test.
"To sign up for the FortiCall service" on page
message to the destination number.
number from which you want to call the destination
number. The FortiVoice unit will connect this number with
the destination number to test the trunk.
Page 173 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
174.