This topic includes:
•
Configuring the time and date
•
Configuring system options
•
Configuring SNMP queries and traps
•
Configuring email settings
•
Customizing the GUI appearance
Configuring the time and date
The System > Configuration > Time tab lets you configure the system time and date of the
FortiVoice unit.
You can either manually set the FortiVoice system time or configure the FortiVoice unit to
automatically keep its system time correct by synchronizing with Network Time Protocol (NTP)
servers.
For many features to work, including scheduling, logging, and certificate-dependent features,
the FortiVoice system time must be accurate.
FortiVoice units support daylight savings time (DST), including recent changes in the USA,
Canada and Western Australia.
To configure the system time
1. Go to System > Configuration > Time.
2. Configure the following:
Figure 25: Time Settings tab
GUI field
System time
Fortinet Technologies Inc.
Description
Displays the date and time according to the FortiVoice unit's clock at
the time that this tab was loaded, or when you last selected the
Refresh button.
Page 74
FortiVoice Enterprise Phone System 4.0.0 Administration Guide