Configuring The Report Query Selection - Fortinet fortivoice Administrator's Manual

Configuring the report query selection

When configuring a report profile, you can select the queries that define the subject matter of
the report.
Each report profile corresponds to a chart that will appear in the generated report.
To configure the report query selection
1. Go to Log & Report > Call Report > Call Report.
2. Click New.
3. Expand Query List and click New.
4. Configure the following:
Figure 94: Query selection
GUI field
Name
Category
Subcategory
From
To
Region
Report column
Fortinet Technologies Inc.
Description
Enter a name for this query.
Select a category for the report profile. The report chart will
correspond to the category selected.
• Call Usage: The number of calls.
• Phone Bill: The cost of making the phone calls.
• Trunk Usage: The status of the trunks being used.
Select to have a summary or detailed report on the report category
you select.
Select to include the source of the incoming calls: Internal, External,
or Any.
Select to include the source of the outgoing calls: Internal, External,
or Any.
Select the call region, such as international or long-distance.
Select the source of the call statistics: from caller or receiver. For
details, see Figure 95 on page
Page 249 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
250.