Modifying Pstn/Pri Trunks (200D-T And 2000E-T2 Only) - Fortinet fortivoice Administrator's Manual

4. Keep Create dialplans for this trunk selected unless you want to create the dialplans by
yourself.
The auto-generated dialplans will replace the default inbound, outbound, and emergency
call dialplans. You can delete them if you do not choose to use the FortiCall service.
5. Click Yes.
6. Enter your name and email address and click Create.
7. Click OK.
The FortiCall trunk is created.
To sign up for the FortiCall service
1. Go to Trunks > VoIP > SIP.
2. Double-click the trunk named FortiCall.
3. Under Account, click Sign Up.
4. On the FortiCall sign up page, fill out the sign-up form and click Submit.
For the System ID and MAC Address fields, use the noted-down information when you
created the FortiCall trunk. See
You will receive an email containing your SIP user name and password for logging into and
manage your FortiCall account.
To log into the FortiCall account
1. Go to Trunks > VoIP > SIP.
2. Double-click the trunk named FortiCall.
3. Under Account, click Login.
4. Enter the login information you received after signing up for the service. See
the FortiCall service" on page
5. Click Login.

Modifying PSTN/PRI trunks (200D-T and 2000E-T2 only)

PSTN (Public Switched Telephone Network)/PRI (Primary Rate Interface) trunks connect your
PBX or VoIP network to your PSTN service providers and through them to the outside world.
These trunks can be analog or digital phone lines.
This option is only available on the FortiVoice 200D-T and 2000E-T2 models.
The FortiVoice 200D-T supports four FXO (Foreign eXchange Office) analog ports and one FXS
(Foreign eXchange Subscriber) digital port.
The FortiVoice 200D-T supports the following default PSTN/PRI trunks:
• T1/E1 voice circuit trunk - pri1 and pri2 that use ISDN PRI
• analog CO (Central Office) trunk - line1 that uses four FXO ports
The FortiVoice 2000E-T2 has duo PRI ports and supports two T1/E1 voice circuit trunks - pri1
and pri2 that use ISDN PRI.
You can modify the default trunks or create new ones.
To view the PSTN trunks, go to Trunks > PRI > PRI.
Fortinet Technologies Inc.
"To create a SIP trunk with FortiCall service" on page
174.
Page 174 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
173.
"To sign up for