10-2] Dil Table & Port Settings - Panasonic KX-TDA100 Programming Manual

2.16.2 [10-2] DIL Table & Port Settings
Direct In Line (DIL) or Direct Dialling In (DDI)/Direct Inward Dialling (DID) can be selected for each
trunk as the method of distributing incoming trunk calls to certain destinations. For each trunk to
which DIL distribution is set, different destinations can be programmed depending on the time mode
(day/lunch/break/night). If desired, Calling Line Identification (CLI) distribution can be used in
conjunction with DIL distribution.
For KX-TDA600, all supported cards are displayed in the Select Shelf & Slot list with their shelf and
slot numbers. Select the card to programme, or select "All" to display all matching cards.
DIL
For each trunk to which DIL distribution is set, different DIL destinations can be programmed
depending on the time mode (day/lunch/break/night). Generally, DIL distribution is used for trunk calls
from analogue trunks. Tenant number and VPS trunk group number can also be programmed for each
trunk.
To assign DIL destination numbers, enter directly or click Destination Setting (see 2.1.6 Extension
Number Setting).
Shelf (KX-TDA600 only)
Indicates the shelf position (reference only).
Value Range
Shelf number
Maintenance Console Location
2.16.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
None
Slot
Indicates the slot position of each trunk card (reference only).
Value Range
Slot number
Maintenance Console Location
2.16.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
None
2.16 [10] CO & Incoming Call
PC Programming Manual 751