9-4] Ndss Key Table - Panasonic KX-TDA100 Programming Manual

2.15 [9] Private Network

2.15.4 [9-4] NDSS Key Table

Extensions at up to 7 other PBXs that will be monitored using Network Direct Station Selection
(NDSS) can be registered. A maximum of 250 extensions can be registered. To create an NDSS
button to monitor an extension, the extension must be registered here first.
To clear NDSS link data, click the NDSS Clear button.
Note that the parameters on this screen can only be set when the Network BLF Data Transmission
for Centralised Operator Feature—Network PBX ID is set to 1 in the 2.15.2 [9-2] Network Data
Transmission screen.
Network Extension No.
Specifies the number of the remote extension (attached to another PBX) that will be monitored. The
number input here can use either Extension Number Method or PBX Code Method.
Value Range
Max. 16 digits (consisting of 0–9, *, #, and "," [comma])
Maintenance Console Location
2.15.4 [9-4] NDSS Key Table
Programming Manual References
None
Feature Guide References
1.30 Networking Features—1.30.1 TIE Line Service
1.30.5.1 Network Direct Station Selection (NDSS)
Network Extension Name for Programming Reference
Specifies the name of the network extension. This name is only shown here, not on the displays of
extensions.
Value Range
Max. 20 characters
Maintenance Console Location
2.15.4 [9-4] NDSS Key Table
Programming Manual References
None
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Network PBX ID of Network Extension to be monitored
Indicates the Network BLF Data Transmission for Centralised Operator Feature—Network PBX ID of
the PBX that the extension is connected to (reference only).
746 PC Programming Manual