Panasonic KX-TDA100 Programming Manual page 270

2.7 [1] Configuration
Feature Guide References
None
Answer Wait Timer
Selects the length of time that the PBX waits for the called outside party to answer an outgoing trunk
call. The line will be disconnected automatically when this timer expires.
Value Range
None, 1 min, 2 min, 3 min, 4 min
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
Feature Guide References
None
Pause Time
Specifies the length of a pause.
Value Range
1.5 s, 2.5 s, 3.5 s, 4.5 s
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
Programming Manual References
None
Feature Guide References
1.5.4.7 Pause Insertion
1.5.4.8 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
1.5.4.9 Special Carrier Access Code
Flash Time
Specifies the length of a flash signal.
Value Range
None, 16 × n (n=1–255) ms
Maintenance Console Location
2.7.25 [1-1] Slot—E1 Port
270 PC Programming Manual