Feature Guide References
None
Bit Position for Clear Back
Selects the position of the clear-back signal control bit in a DR2 signal.
Value Range
A-bit, B-bit, A&B-bit
Maintenance Console Location
2.7.22 [1-1] Slot—E1 Card Property—Line Signal Setting
Programming Manual References
None
Feature Guide References
None
Forced Release
Enables the PBX to send a forced release signal.
Value Range
Disable, Enable
Maintenance Console Location
2.7.22 [1-1] Slot—E1 Card Property—Line Signal Setting
Programming Manual References
None
Feature Guide References
None
Forced Release Pattern
Selects the bit pattern for a forced release signal.
Value Range
A=0/B=0, A=0/B=1, A=1/B=0, A=1/B=1
Maintenance Console Location
2.7.22 [1-1] Slot—E1 Card Property—Line Signal Setting
Programming Manual References
None
2.7 [1] Configuration
PC Programming Manual
243