10-2] Dil Table & Port Settings - Panasonic KX-NCP500 Pc Programming Manual

12.2 [10-2] DIL Table & Port Settings
Direct In Line (DIL) or Direct Inward Dialing (DID) can be selected for each CO line as the method of distributing
incoming CO line calls to certain destinations. For each CO line to which DIL distribution is set, different
destinations can be programmed depending on the time mode (day/lunch/break/night). If desired, Calling Line
Identification (CLI) distribution can be used in conjunction with DIL distribution.
DIL
For each CO line to which DIL distribution is set, different DIL destinations can be programmed depending on
the time mode (day/lunch/break/night). Generally, DIL distribution is used for CO line calls from analog CO
lines. Tenant number and VM trunk group number can also be programmed for each CO line.
To assign DIL destination numbers, enter directly or click Destination Setting (see 2.1.6 Extension Number
Setting).
Shelf
Indicates the shelf type (reference only).
Default
Current shelf type
Value Range
Physical, Virtual
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Manual References
None
Slot
Indicates the slot position of each CO line card (reference only).
Default
Current slot number
Value Range
Slot number
Maintenance Console Location
12.2 [10-2] DIL Table & Port Settings
Document Version 2009-12
12.2 [10-2] DIL Table & Port Settings
PC Programming Manual 785