Installing The Maintenance Console - Panasonic KX-TDA100 Programming Manual

1.2 PC Programming

Installing the Maintenance Console

Notes
• To install or uninstall the software on a PC running Windows 2000 Professional or Windows
XP Professional, you must be logged in as a user in either the "Administrators" or "Power
Users" group.
• To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed.
Follow the instructions of the wizard to install the KX-TDA USB driver. When the Hybrid IP-
PBX is first connected to the PC via USB, you may be asked to select the appropriate USB
driver. Browse for and select the KX-TDA USB driver that was installed previously.
Starting the KX-TDA Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code and
connect to the Hybrid IP-PBX for the first time after initialisation (with the factory default setting),
Quick Setup will launch automatically. During Quick Setup, you will set up the following basic items:
• Date and Time of the Hybrid IP-PBX. The date and time set to the PC's clock will be used.
• System Password for installer for PC programming.
• Operator and manager settings. Operator extensions for all time modes (day/lunch/break/
night) can be assigned.
• Flexible Numbering plan to Type 1 or Type 2. If Type 1 (with
all feature numbers (except access numbers) when an extension user wants to use a
feature.
• Operator call and Idle Line Access/ARS numbers.
• Remote Maintenance Dial Number. Enter the complete telephone number of the Hybrid IP-
PBX (including the country code). When necessary, this number will be used to access the
Hybrid IP-PBX from a remote location for maintenance purposes.
18 PC Programming Manual
1. Copy the setup file of the KX-TDA Maintenance Console to
your PC. (Its icon is shown here, on the left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the
installation wizard.
1. Connect the PC to the Hybrid IP-PBX with a USB cable.
2. Start Maintenance Console from the Start menu.
3. "Information Before Programming" appears.
a.
Carefully read this important additional information,
which includes updates to this and other manuals.
b.
Click [OK] to close this window.
) is selected, " " must prefix