1-1] Slot-Bri/Pri Card Property - Panasonic KX-TDA100 Programming Manual

2.7 [1] Configuration
2.7.13 [1-1] Slot—BRI/PRI Card Property
The properties of the BRI or PRI (available with the KX-TDA100/KX-TDA200/KX-TDA600 only) card
can be specified.
ISDN CO / QSIG Master / QSIG Slave—T200
Specifies the maximum time that the PBX waits for a reply after sending the L2 command to ISDN.
Value Range
0–600 × 100 ms
Maintenance Console Location
2.7.13 [1-1] Slot—BRI/PRI Card Property
Programming Manual References
None
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T202
Specifies the maximum time that the PBX waits for a reply after resending the request to use an ISDN
line as a TIE line.
Value Range
0–600 × 100 ms
Maintenance Console Location
2.7.13 [1-1] Slot—BRI/PRI Card Property
Programming Manual References
None
Feature Guide References
1.30.1 TIE Line Service
ISDN CO / QSIG Master / QSIG Slave—T203
Specifies the length of time to detect no communication status of L2.
Value Range
0–600 × 100 ms
Maintenance Console Location
2.7.13 [1-1] Slot—BRI/PRI Card Property
156 PC Programming Manual