6-2] Caller Id Modification - Panasonic KX-TDA100 Programming Manual

2.12 [6] Feature

2.12.2 [6-2] Caller ID Modification

The telephone numbers of incoming callers can be modified automatically by a Caller ID Modification
Table, and then recorded for calling back.
Caller ID Modification
The PBX looks for incoming telephone numbers that begin with an area code programmed in the
Caller ID Modification Table assigned to that trunk group. If it finds such a code, it removes digits and
adds a number to the telephone number. If this modified telephone number is stored as a System
Speed Dialling number, the caller's name can be shown on a PT display and the call can be routed
to a certain extension (CLI destination). A maximum of 4 Caller ID Modification Tables, each
containing 10 local/international call data and 1 long distance code, can be programmed. Each trunk
group can select a table for use. Select the desired table from the Modification Table list.
If the telephone number does not contain an area code programmed here, it is modified based on the
Long Distance Code settings.
Area Code (for Local / International Call Data 1–10)
Specifies the leading number (area code) to look for in the incoming caller's number.
Value Range
Max. 6 digits (consisting of 0–9, *, and #)
Maintenance Console Location
2.12.2 [6-2] Caller ID Modification
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Removed Number of Digits
Specifies the number of digits to be removed from the beginning of the incoming caller's number.
Value Range
0–9
Maintenance Console Location
2.12.2 [6-2] Caller ID Modification
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings—Caller-ID Modification Table
2.12.1 [6-1] System Speed Dial
Feature Guide References
1.18.1 Caller ID
700 PC Programming Manual