Panasonic KX-TDA100 Programming Manual page 297

Value Range
Immediate: Sends the dialled digits to the trunk when the First Dial Timer expires.
Wink: Sends the dialled digits to the trunk when the wink signal is received.
Maintenance Console Location
2.7.31 [1-1] Slot—DID Port
Programming Manual References
None
Feature Guide References
None
CPC Detection Time—Out (DID), In (DID)
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming trunk
calls before disconnecting the line. When None is selected here, the line will not be disconnected
when a CPC signal is not detected.
Value Range
None, 80 × n (n=2–75) ms
Maintenance Console Location
2.7.31 [1-1] Slot—DID Port
Programming Manual References
None
Feature Guide References
1.11.10 Calling Party Control (CPC) Signal Detection
Sending Caller ID to CO
Specifies whether Caller ID information is sent to an analogue trunk.
Value Range
No, Yes
Maintenance Console Location
2.7.31 [1-1] Slot—DID Port
Programming Manual References
None
Feature Guide References
None
2.7 [1] Configuration
PC Programming Manual 297