Panasonic KX-TDA100 Programming Manual page 253

Maintenance Console Location
2.7.23 [1-1] Slot—E1 Card Property—MFC1
Programming Manual References
None
Feature Guide References
None
Group-l Code Assignment—End of Digit Timer
Specifies the length of time that the PBX waits for further signal before detecting the end of digit of
an ANI number.
Value Range
1–15
Maintenance Console Location
2.7.23 [1-1] Slot—E1 Card Property—MFC1
Programming Manual References
None
Feature Guide References
None
Group-ll Code Assignment—G-ll Code Outgoing Call
Specifies the code for sending Group-ll code to the telephone company.
Value Range
1–15
Maintenance Console Location
2.7.23 [1-1] Slot—E1 Card Property—MFC1
Programming Manual References
None
Feature Guide References
None
Group-ll Code Assignment—G-ll Code Incoming Call [01]–[15]
Specifies the destination of incoming trunk calls for each Group-ll code respectively.
Value Range
Undefined, Subscriber, Operator, Collect Call
2.7 [1] Configuration
PC Programming Manual 253