Panasonic KX-TDA100 Programming Manual page 679

Feature Guide References
None
DISA Intercept—Intercept when No Dial after DISA answers (MPR Software
File Version 3.1000 or later)
Selects how DISA calls are handled if the caller does not select any option from the menu.
Value Range
to Operator, to AA-0, to AA-9, Disable (Reorder Tone)
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Guide References
None
CO-CO with DISA—DISA to Public CO
Specifies whether the DISA port of the message card is released when a trunk-to-public trunk call
using DISA is established. To enable this setting, "CO-CO with DISA—Fwd/Transfer to Public CO"
on this screen should be set to "Enable".
Setting this to "Disable" will free up DISA ports faster, but prevent DISA being used to detect the end
of a call and disconnect the trunk quickly.
Value Range
Disable (Release DISA): The DISA port of the message card is released when a trunk-to-public trunk
call using DISA is established.
Enable: DISA stays connected for the duration of the call, to allow detection of the end of the call.
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.11.3 [5-3-1] Voice Message—DISA System—Option 1—CO-CO with DISA—Fwd/Transfer to Public
CO
Feature Guide References
None
CO-CO with DISA—DISA to Private Network
Specifies whether the DISA port of the message card is released when a trunk-to-private trunk call
using DISA is established.
To enable this setting, "CO-CO with DISA—Fwd/Transfer to Private Network" on this screen should
be set to "Enable".
2.11 [5] Optional Device
PC Programming Manual 679