Panasonic KX-TDA100 Programming Manual page 144

2.7 [1] Configuration
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Caller ID—Caller ID (FSK) Detection Start Timer
Specifies the length of time that the PBX waits before attempting to detect Caller ID information, after
receiving a call. To enable this setting, Caller ID—Caller ID Signalling on this screen should be set
to FSK.
Value Range
None, 80 × n (n=1–15) ms
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Caller ID—Caller ID (FSK) Detection Timer
Specifies the total time required by the PBX to detect Caller ID information. To enable this setting,
Caller ID—Caller ID Signalling on this screen should be set to FSK.
Value Range
80 × n (n=13–50) ms
Maintenance Console Location
2.7.10 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Caller ID—Caller ID (DTMF) Start Code 1 and Start Code 2
Selects the DTMF code used to detect the beginning of a Caller ID series. Start Code 1 is prior to
Start Code 2.
144 PC Programming Manual